Fluoresce stereo microscope light shield rib

The tenon is about 0.3mm too narrow, resulting a poor fit over the holding ring. The bottom of the tenon fall off the mortise on the holding ring for about 1.6mm. The cut out on the other end for the opaque foil is pretty good. Like the holding ring, it needs to be tweaked in the next revision.

May 18,2022
24 viewsReport item
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More

    You might like

    Earn a $5 Welcome Bonus